|
Post by Joe Lyddon on Oct 8, 2010 16:22:09 GMT -8
This is the first Card Box... Maple and Walnut. I was going to use those little 5mm barrel hinges, but had a problem I didn't feel like solving. So, I merely used small metal pieces of about 1/4" in diameter and 1/2" long for little axles for the Top into the Sides (inserted before & during the glueup). Finish was BLO (boiled linseed oil), 4-5 coats Garnet dewaxed shellac, very light sanding, and Johnson's Paste Wax.
|
|
|
Post by Joe Lyddon on Oct 8, 2010 17:03:05 GMT -8
Box #2 has been posted...
|
|