|
Post by Joe Lyddon on Jul 6, 2010 20:00:17 GMT -8
A few years ago, I made a box for our manuals... It's made from Poplar 3/8" sides... sanded to much thinner. Finished with a few coats of Orange Shellac. Top is scrap Poplar plywood... trimmed to fit into the box. Bottom is 3/4 scrap plywood... whatever I had on hand. Hand cut dovetails... No glue required in connecting the sides together... Never did take any pictures... until now...
These are all of the pictures I have for this box...
|
|